|
 RADIOHF - Brick 2 sdr 
- I have up for sale Brick 2 for sale it is about of 3 months old it will do 15 watts perfect for low drive amps works on Thetis $625.00 shipped postal money order or Zelle
- Listing #1735692 - Submitted on 07/10/25 by Callsign NY3R, Modified on 07/11/25 - IP: 45.133.172.215
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
 RADIOVHF - KDK FM-2025, Mark II, 2 meter Xcvr FS
KDK FM-2025, Mark II, 2 meter Transceiver For Sale:
-
The KDK FM-2025, Mark II, is a fully synthesized
2 meter FM transceiver covering the entire band.
-
It memories and scan features, as one would
expect in most 2 m rigs. It is simple and easy to
operate, and does NOT have dozens of menus to
track thru.
-
One useful extra is a built-in tone switch.
An internal switch allows you to select between
a continuous tone or a half-second tone burst.
-
This one is a tech special. Power out is on the
order of 45 W/12 W, and is fine. Receive has a
problem however.
.
Buy this unit with paper work for $30 plus shipping
from Florida.
The final output module is worth more than that!
-
Thanks. 73,
Ken Simpson, W8EK
Voice Phone (352) 732-8400
.
- Listing #1735792 - Submitted on 07/11/25 by Callsign W8EK - IP: fl-67-76-85-5.sta.embarqhsd.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- MISC - Kenwood TS-440 Parts For Sale
I have parts for a Kenwood TS-440 available.
-
Hopefully we can keep a couple units working
and looking nice using these parts.
-
The rear part of the bottom cover is presently
available.
It looks very nice, and might improve the
looks of your rig.
-
The small little silver rectangular buttons
are still available.
-
Most small PC boards, such as selectivity switch,
mic jack, front panel push buttons, etc. are
available.
-
Some knobs are available.
-
The automatic antenna tuner, final module, PTO, and
large PC boards are no longer available.
-
Please let me know what you need.
-
Thanks. 73,
Ken Simpson, W8EK
Voice Phone (352) 732-8400
.
- Listing #1735791 - Submitted on 07/11/25 by Callsign W8EK - IP: fl-67-76-85-5.sta.embarqhsd.net
- Click to Contact -- Send this Ad to a Friend
- MISC - TenTec Omni 546 Parts For Sale
TenTec Omni 546 Parts For Sale:
-
I have a TenTec Omni D, Series B, Model 546 that I
am parting out.
Many, probably most, of the parts are compatible
with most all of the Omni series A, B, and C rigs.
-
PTO, digital readout, both covers, front panel, and
final module are gone, but many, many parts are still
available.
-
Available:
-
Metal parts:
Rear panel
left and right sides
main chassis
-
3 switch module on left side
-
S meter light and socket
-
Plastic PCB Holder sockets
-
Offset pot
-
Drive pot
-
Selectivity rotary switch
-
Mode switch
-
Mic jack
-
Headphone Jack
-
Plus a few things not listed.
-
Please let me know what you need.
-
Thanks. 73,
Ken Simpson, W8EK
Voice Phone (352) 732-8400
.
- Listing #1735790 - Submitted on 07/11/25 by Callsign W8EK - IP: fl-67-76-85-5.sta.embarqhsd.net
- Click to Contact -- Send this Ad to a Friend
- MISC - TenTec Century 21, Model 570 Parts FS
TenTec Century 21, Model 570 Parts For Sale:
-
I have parts from a Century 21, model 570, available.
Most of these parts should also fit the Model 574
digital version.
Hopefully these parts will let several rigs live again.
-
All covers, PTO, knobs, power supply parts, and final
module are gone.
-
Available Parts:
-
Metal parts:
Inside front subpanel
Rear Panel
Both left and right sides
Main chassis
-
Headphone Jack
-
3 pilot bulbs and sockets
-
Circuit Board Assemblies Available:
Audio Power Amp 80357
Front end board 80359
Low Pass Filter 80360
-
Please let me know what you would like.
-
Thanks. 73,
Ken Simpson, W8EK
Voice Phone (352) 732-8400
.
- Listing #1735789 - Submitted on 07/11/25 by Callsign W8EK - IP: fl-67-76-85-5.sta.embarqhsd.net
- Click to Contact -- Send this Ad to a Friend
- MISC - Heathkit Parts For Sale
Parts for Heath For Sale:
-
Many SB-630 parts are available, plus some HD-15 parts..
-
For the SB-630:
-
Most of the internal parts are left, including
all of the "under chassis" parts.
-
Front panel, clock and outer case are gone, but
reflectometer assembly,, switches, etc. are still
available.
-
-
For the HD-15 phone patch
-
Internal parts are available, including transformers. Knobs are available.
-
Outer case and meter are gone.
-
-
Please let me know what you need.
-
Thanks. 73,
Ken Simpson, W8EK
Voice Phone (352) 732-8400
.
- Listing #1735788 - Submitted on 07/11/25 by Callsign W8EK - IP: fl-67-76-85-5.sta.embarqhsd.net
- Click to Contact -- Send this Ad to a Friend
- RADIOHF - FS: Icom Front Handles for Many Radios
- For Sale: Icom Front Handles for Many XCVRs: IC-781, IC-7700, large Icom receivers and transceivers, etc
-
These are in excellent condition (see photo), however I DO NOT HAVE THE CORRECT SCREWS that goes with them - they come with no screws. I shouldn't be too difficult to find the correct screws, I think they are metric M5 (?)
-
$60 +$15 S/H to CONUS...... Pay via a Personal Check, Postal Money Order, PayPal F & F, or just cash upon local pickup
- Listing #1735785 - Submitted on 07/11/25 by Callsign W5CCP - IP: ip68-97-26-159.ok.ok.cox.net
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOHF - Elecraft P3 Panadapter # 3308 VGA
- Elecraft P3 Panadapter - Works great with cables # 3308 VGA SVGA
$859 delivered - check, Zelle, PP FF ok.
This is a nice P3
Comes with standard k3 hookup cables, and manual.
If you need the special cable for a k3s,I have those in another listing.
I have a matching K3 in another listing.
Very Good condition..
I use one of these every day,and this one is not needed in my shack.
These have been discontinued at Elecraft.
Comes with manual and cables as shown.
This can also be used with a non Elecraft radio,and you may need to make up special cables.
I also have another P3 without VGA that will list ASAP.
Please see pictures for more details.
Local pickup is also fine.
I can be reached through email if you have questions about this unit.
Larry K6RO
- Listing #1735784 - Submitted on 07/11/25 by Callsign K6RO - IP: syn-067-253-101-060.res.spectrum.com
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
- RADIOHF - Auction website
- Here is the website for my auction tomorrow
https://www.auctionzip.com/OH-Auctioneers/11481.html
- Listing #1735783 - Submitted on 07/11/25 by Callsign K8ZBY - IP: syn-074-134-194-007.res.spectrum.com
- Click to Contact -- Send this Ad to a Friend
- RADIOHF - Elecraft K3/100 Transceiver # 075
- Elecraft K3/100 High Perf 160-6m Transceiver KPA3 2.7 # 075 100 Watt
$1469 delivered - check, Zelle, PP FF ok.
SER # 075
Tuner
100 Watts
2.7 SSB filter
KIO3
Gold front panel pins
kpa3 gold pins
neogrip on vfo knob
17 updates done in 2017
Very nice radio
Latest firmware installed. 5.67
Works as it should.
Good condition.
Power cord
manual
Used it today on CW and SSB.
If you are looking for a great radio without lots of options that you won't use,this may be for you.
And if you want a K3 with more options,I have many to choose from.
Please see pictures for more details.
Local pickup is also fine.
Shipping from 04015
I can be reached through email if you have questions about this unit.
Larry K6RO
- Listing #1735781 - Submitted on 07/11/25 by Callsign K6RO - IP: syn-067-253-101-060.res.spectrum.com
- Click to Contact -- Click Here to View Picture -- Send this Ad to a Friend
|
= Ad was Edited or Renewed 
= Original Ad
Previous 10 Ads
Next 10 Ads 
